1 / 2
Dual Gear Extruder mount for 3DFused direct drive bracket — image 1
1 / 2

Dual Gear Extruder mount for 3DFused direct drive bracket

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is for one of the dual gear extruders so you can mount it to the 3DFused direct drive bracket, or any other…

Rating
0 / 5
Likes
4
Downloads
20
Makes
0
Views
208
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This is for one of the dual gear extruders so you can mount it to the 3DFused direct drive bracket, or any other bracket that puts the motor to the front of the hotend. The specific extruder I made this for is in the link below. There are a few flavors of this extruder that are very similar in specs, so this should fit those too.

https://smile.amazon.com/gp/product/B08Y5T1392

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

20

Filament: 3D Solutech PLA+

Carbon Black

Notes:

Might need to go with PETG or ABS if you're going to keep your printer trapped in a heat box that might melt PLA. Otherwise, PLA+ is probably just fine

Category: 3D Printer Extruders

Tags