Dual Gear Extruder mount for 3DFused direct drive bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is for one of the dual gear extruders so you can mount it to the 3DFused direct drive bracket, or any other…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is for one of the dual gear extruders so you can mount it to the 3DFused direct drive bracket, or any other bracket that puts the motor to the front of the hotend. The specific extruder I made this for is in the link below. There are a few flavors of this extruder that are very similar in specs, so this should fit those too.
https://smile.amazon.com/gp/product/B08Y5T1392
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20
Filament: 3D Solutech PLA+
Carbon Black
Notes:
Might need to go with PETG or ABS if you're going to keep your printer trapped in a heat box that might melt PLA. Otherwise, PLA+ is probably just fine
Category: 3D Printer Extruders