1 / 5
8-Bit Jumping Super Mario Wall Art (No AMS/MMU) — image 1
1 / 5

8-Bit Jumping Super Mario Wall Art (No AMS/MMU)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Give power of Super Mario to your wall!

Rating
1 / 5
Likes
9
Downloads
60
Makes
0
Views
348
Reviews
1

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Share Alike

This model consists 2 variations. First model to print with 3 colors of classic Super Mario, second is to print with 5 colors which has similar colors to modern version of Super Mario. You can print these in multicolor without MMU or AMS. You have to add pause commands to your g-code, some slicers such as PrusaSlicer or OrcaSlicer have this function in their interface.
 

1.  To print 8-Bit Super Mario with default colors:

Each layer is 0.2mm, total width is 2.60mm, if you scale the model kindly keep the Z-axis width fixed

  • Start with "YELLOW",
    Before Layer 6 PAUSE, Switch to "LIGHT BROWN",
    Before Layer 10 PAUSE, Switch to "RED"
    Layer 13 completed, congratulations!

 

2. To print 8-Bit Super Mario with 5 colors:


Each layer is 0.2mm, total width is 3.60mm, if you scale the model kindly keep the Z-axis width fixed

  • Start with "BEIGE",
    Before Layer 6 PAUSE, Switch to "RED",
    Before Layer 9 PAUSE, Switch to "BLUE",
    Before Layer 12 PAUSE, Switch to "BROWN",
    Before Layer 15 PAUSE, Switch to "YELLOW",
    Before Layer 17 PAUSE, Switch to "BLACK",
    Layer 18 completed, congratulations!
     

Tags