8-Bit Jumping Super Mario Wall Art (No AMS/MMU)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Give power of Super Mario to your wall!
- Ocena
- 1 / 5
- Polubienia
- 9
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 348
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
This model consists 2 variations. First model to print with 3 colors of classic Super Mario, second is to print with 5 colors which has similar colors to modern version of Super Mario. You can print these in multicolor without MMU or AMS. You have to add pause commands to your g-code, some slicers such as PrusaSlicer or OrcaSlicer have this function in their interface.
1. To print 8-Bit Super Mario with default colors:
Each layer is 0.2mm, total width is 2.60mm, if you scale the model kindly keep the Z-axis width fixed
Start with "YELLOW",
Before Layer 6 PAUSE, Switch to "LIGHT BROWN",
Before Layer 10 PAUSE, Switch to "RED"
Layer 13 completed, congratulations!
2. To print 8-Bit Super Mario with 5 colors:
Each layer is 0.2mm, total width is 3.60mm, if you scale the model kindly keep the Z-axis width fixed
Start with "BEIGE",
Before Layer 6 PAUSE, Switch to "RED",
Before Layer 9 PAUSE, Switch to "BLUE",
Before Layer 12 PAUSE, Switch to "BROWN",
Before Layer 15 PAUSE, Switch to "YELLOW",
Before Layer 17 PAUSE, Switch to "BLACK",
Layer 18 completed, congratulations!