1 / 1
Atorch DL24P Electronic Load Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Atorch DL24P Electronic Load case
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 295
- Makes
- 1
- Views
- 1,885
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Materials
- 4x M3x3 heat set inserts (short)
- 4x M3x10 or M3x12 socket head screws
Optional: Print LED light pipe in transparent PETG (or skip altogether)
Preparation
- Insert M3 heat set inserts, being careful of posts with cut profiles
Assembly
- Remove heatsink assembly and mount-plate
- Install optional light-pipe (tight fit, but glue if necessary)
- Insert buttons in top shell with (“+” on right side)
- Install PCB into top shell
- Reinstall heatsink mount-plate onto PCB
- Install bottom shell & screws—go gently on front posts
- Apply fresh thermal paste
- Reinstall heatsink assembly