PID and Dimmer enclosure for Vibiemme Domobar espresso machine
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This box was developed for a better finish on the installation of a PID and Dimmer in a Vibiemme Domobar.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This box was developed for a better finish on the installation of a PID (model XMT 7100) and Dimmer in a Vibiemme Domobar.
I printed this one in PETG from Sunlu, using a Sovol SV07 Plus, Cura slicer, 235 degrees, 80 degrees bed temperature, no brim, no supports needed. Other configurations I used: 0.2mm (draft), speed 200 mm/s, acceleration 5000 mm2/s, tri-hexagon pattern with 20% infill density, 2 wall loops. Wall ordering Outer/Inner, z seam alignment: random.
Links for parts below:
PID: https://s.click.aliexpress.com/e/_DEjqXdz
SSR: https://s.click.aliexpress.com/e/_DmVB623
PT100: https://s.click.aliexpress.com/e/_DD43ogX
Dimmer: https://s.click.aliexpress.com/e/_Dlpra35
Aluminium enclosure: https://s.click.aliexpress.com/e/_DFB8CUX
Black aluminum enclosure: https://s.click.aliexpress.com/e/_DCXkNzd