Deception Replacement Box and Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fully printable hinged box for Deception, fits unsleeved expansion.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 39
- Makes
- 1
- Views
- 468
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
1-29-25 Edit: One person reported their bullets were too tight, increased size of holes to 13mm.
I bought a secondhand copy of Deception and the box was trashed and dirty, so I bought the expansion hoping it could fit. I actually did make it fit in the expansion box with a ton of lid lift, but have been planning a full 3D printed box for a while.
Sleeved role cards, unsleeved Means/Clues. You might be able to fit sleeved base game cards, but I haven't tried it. Box is roughly 7" square, 175mm.
Multicolor and single color versions available. Needs 4 x (8x3mm) magnets.
Print one top and one bottom as oriented, flat sides down. Align the hinge and put a scrap piece of filament through the hole. Leave 1-2mm on each side and use a heat source to melt the ends and press flat against a hard surface.
Carefully insert the magnets in the right orientation. Print my Magic Magnet Tool first so you don't mess up the polarity.
Happy Gaming!
---------------
If you love board games check out my 100+ free designs here on Printables! Or inserts available for purchase on Printables. And check out all the designs for sale at my Etsy shop Taylor Jane Design Co.