Rode Wireless Go II box (Based on Ruggd Box)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits 1 set of Rode Wireless Go II microphones, 1 cable and windshields
- Rating
- 4.875 / 5
- Likes
- 55
- Downloads
- 264
- Makes
- 8
- Views
- 1,399
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Custom made insert for parametric "Rugged Box". Fits Rode Wireless Go II microphones (didn't test 1st gen microphones, only 2nd gen).
You will need:
- 4x M3x20mm bolts
- 2-3mm thick foam (optional)
- super glue
TIPS:
Print the letters upside down, so they have a better finish. Glue them in place.
Cut to size & glue in the foam. If you don't have foam you can use “Top Spacer.stl” and glue it in the bottom of the lid. Mine worked fine and had very minimal play when shaking the box. Don't use foam that's too thick, because you will be forcing the box to close.
The insert fits in only 1 way. Check the pictures and test before gluing. The box doesn't close well otherwise.