1 / 1
Tube Cap M15
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement cap for tubes with M15 thread
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 154
- Makes
- 1
- Views
- 401
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The thread in the original cap broke, leaving a puddle of silicone grease on my shelf. To my surprise, I found no models for plain replacement caps, so I made one.
This is a simple modification of a lube injector cap from uepsie that I knew would fit on this kind of tube. I just removed the injector part and closed the cap. Praise for the design should go to uepsie, blame to me. 😉
Printing
Just print the cap with the flat side to the headbed. Use a material that resists the stuff in the tube. I used standard PLA and a 0.2mm layer height.