Counting matching models…
The thread in the original cap broke, leaving a puddle of silicone grease on my shelf. To my surprise, I found no models for plain replacement caps, so I made one. This is a simple modification of a lube injector cap from uepsie that I…
I wanted to connect the reasonably priced IKEA Fridans Roller-shade with a roller motor. The IKEA motorized roller shades are quite pricey (+100€) in Germany and I did not want to dive into the IKEA smart Home system. The zemismart AM15…
You can buy these from me here! Consider giving us a 1 time donation if you like this model! I have uploaded the raw .STL files, and I have also uploaded my .3mf files. The raw .STL files do not have the holes for the light made in them,…
Crosshair laser attachment for Atomstack X30/A30/S30 Pro laser module (M150 160W / 33W ) Also included the pinouts for the laser module to get power for the red laser module Update: Added a new design which is slightly outside the layer…
CZ: Adaptér není vhodný pro použití ve vodovodním řádu, kde může být tlak až 6 bar, nicméně pro montáž za vodovodní baterii u sprchy, umyvadla či dřezu je možné ho použít (nízký tlak). Pro tisk doporučuji použít PETG (zdravotně nezávadný)…
Pol Pot - Jeep M151 Mutt
This is exactly to standard. I just made it printable. I do not know where you can buy one of these made out of metal, but I would like to, for no good reason. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
You can purchase this item from me here! Consider supporting us on Patreon! This conical diffuser fits snugly onto your flashlights! It's great for lighting up tight spaces or for lighting up a tent while camping. Give it a print! Check…
Not tested yet! This thingy is supposed to protect the threads on the muzzle of my Haenel CR 308 - hence the outer dimensions. I intend to print this in PC Max. It should withstand a few shots, it just must not get too hot. For hunting…
Grease injector for standard LM8UU and the longer LM8LUU linear bearings with M15 thread. Fits on LiquiMoly LM47 tubes for example.
I needed a small hook with some threads and a nut to hold it all together. This is it. Supports required (auto-painted, snug worked well for me). I printed in PETG for my application. F3D file included so you can easily make different…
Hi, this is a simple stand for a Hoymiles HM-1500 micro frequency converter. Mainly designed to keep it in place on a flat roof, under the Panels. You will need: 2pc. M5 threat inserts 2pc. M5 Screw 20mm 2pc. washer The connector is…
This is a simple webcam cover for my Alienware m15 R7. I made two models, one with straight corners and one with 45 degree corners. Clips on and stays in place. For non m15 R7's, you might have to tweak the design a little.
XM1584 DC-DC Step Down Power Supply case need cheap XM1584 module like this : https://aliexpress.com/item/4000500042973.html ------ Happy Print to the whole community :)
Model This allows you two mount either one or two V Mount or Gold Mount plates to your Movi M5/M10/M15 replacing the annoying and dangerous LIPO pouch cells. It replaces the original battery cages and allows you to use inductry standard…
This a small box to house the XUM1541 I got from myretrostore-uk on ebay. There are 2 lid options, one with writing on as seen in the pics and one blank. The lid is just a press fit, but quite tight.
Klíčenka přední masky Fordu MUTT M151A1 Keychain MUTT
Print with low layer height, e.g. 0.15 mm for a 0.4 mm nozzle, in order to achieve a good thread stability.
Works best with PETG 30% infill or greater. Print upside down for best results. Don't use PLA.
I recently bought a UNI-T model LM100 laser distance meter. Unfortunately, this meter is not equipped with a thread for fixing it to a tripod. So I designed a suitable holder with 1/4" UNC thread which allows you to mount this meter on…
I created this fin to redirect the hot air coming out of the back of the laptop and prevent it from being recirculated back into the laptop. The cable holder is optional. It might work with other laptops as well.
I live in a old house and have double box windows (Doppelkastenfenster) where I would like to install the blinds inbetween windows in the box. Here the room to attach and maneuver is very tight so I had to take about 2cm out of the…
This is a upgrade mod to eliminate the front and back y-frame plates along with the cheap idler bracket and wimpy y-motor bracket. This mod gives you stronger y motor bracket and a better idler tension . Also changes the belt path to be…
This is a case for the Questyle M15i mobile DAC/AMP Print in TPU with supports, I did tree auto, from build plate only.
The easy way how to install Zemismart AM15 smart blinds motor to window frame/door. Perimeters: 5 Material: PETG
Klíčenka přední masky Fordu MUTT M151A2 Keychain MUTT
This is a STANAG rail mount using the readily available, surplus WWII M15 quadrant sight, for use on Xproducts Can Cannon T-Shirt Launcher with a flat top upper. Three files are given, a mount and 2 clamps. One clamp is counter bored for…
This ia a drag chain riser. I needed the nubs, so I made it to fit the Malyan M150 with the correct height. This will be a work in progress, as I doubt I will get it correct the first time. So lookout for a v2, 3 or even 4... We shall…
Cap which houses the airfilter for an LM15-350 compressor. I printed this in colour changing PLA, infill of 15%. The original cap broke quite soon after purchase so I added a version which has a thicker top plate. It might need a…
Stackable or wall-mounted organizers for extra chuck jaws. Prior to this, all my chuck jaws were loose in the same box. Models fit most jaws for VicMarc 120 chucks , or VicMarc 150 chucks . I also made another version for VicMarc VM100…
K vylepšení modelu motorového vozu M152/810 od MTB v měřítku 1:120 jsem zkusil vytisknout stěrače čelního okna, abych zkusil, jak to budou vypadat a zda to půjde (iritují mne díry, které jsou pro ně bez užitku přepravené). Jak se zdá,…
M15 Spacers Inner Diameter: 15.1 mm Outer Diameter: 31.1 mm Heights: 2 mm / 4 mm / 6 mm / 8 mm / 10 mm Generated with the <BRB> Shape Generator | BSG v10
Originally designed as a replacement for parts for folding bicycles. Use a rather flexible but strong material, like PETG, ASA, ABS. Simply insert the protector into the hexagonal nut.
This reducing fitting allows connecting two pipes with different thread standards: M15x1.5 metric thread on one side and G1/2 BSP (British Standard Pipe Parallel) on the other. Designed for shower systems, thermostatic valves, or any…
Needed a diffuser for my LED M150 light since I lost the one that came with it. It was way more difficult than I thought to find a replacement part so I threw this thing together. I printed in transparent filament of course but perhaps…
Case for the Questyle M15 series dongle DACs. No need for soft filament and loads into the front.
Modular X-Carriage for M150 (and similar i3 clones like wanhao duplicator i3) NOTE: This is useful only if you are actually using different tools often and planning to change between them on a single printer (for e.g. I switch often…
V74PX Adapter for LR54 Button Cells Idea As so often, there are already several solutions out there, but none of them really appealed to me. So I designed my own battery adapter. It should be as easy to use and as flexible as possible.…
I looked at some solutions for wanhao and similar i3 clones like http://www.thingiverse.com/thing:1672640 and the remixes but they all don't really fit Malyan M150 properly as M150 comes with 3 linear bearing blocks that are different in…
Pegboard holder for the Franklin Sensors M150 Stud Finder
Printed without supports except under the 'arm' holding the fan (see in the image). I printed this with PLA, and it's just fine (it shouldn't get hot under any normal circumstances, so no need for more heat resistant plastics like PETG).…
Just a redux of the stock cooler off the malyan m150. The cooling outlet is smaller and pointed slighter a more downward angle to keep the air from blowing on the hotend Print Settings Printer: Malyan 150 Rafts: No Supports: Doesn't…
3 éléments permettant d'adapter le répartiteur 3-en-1 avec trappes de Holzprofi sur l'aspirateur Felder AF14. Holzprofi AB-YM150 120/100/120 Felder AF14 DE140 en entrée 1x Adaptateur_DI145_DE140 2x Adaptateur_DE120_DI120 1x…
This is a skadis mount for the ProSensor M150 stud finder by Franklin.
CL1M15 is a futuristic concept sedan designed for high-end visualization and concept presentations. Clean surfacing, sculpted wheel arches, and a bold grille create a luxury aesthetic while compact proportions keep it versatile for studio…
The original levers tend to brake after some time, so I made spares that are reinforced at the weakspot (as much as the space allows). Recommended to print with PETG.
I modified original only slightly so that I can fit it on M150 and ramps1.4 + RepRapDiscount Full Graphic Smart Controller (moved the SD card slot ). You will need either a sd card "extender" like http://www.thingiverse.com/thing:1335637…
very simple part, goes around your Y tightener and keeps it straight, allows for an idler pulley to be screwed on the bottom (M4 screw and semi trapped traveling nut) so you can tighten your belt. I'm using GT2 pulleys on new Z motors…
X-Carriage (for Wanhao Duplicator I3, Malyan M150 and similar I3 clones) that can carry dual flex3drive extruder drive. source "files" (onshape) I'm using this flex3drive dual driver with 2 hexagons (one 1.75mm other 3.00mm) and am now…
This conversion is inspired by (although not based on) this model: https://www.thingiverse.com/thing:3210757 Required: 4x M3x4 (reused from the frame) 8x M3x6 (reused from the frame) 32x M3x10 (four that are used for filament guide can be…
If you mod your M150 to link Z motors with https://www.thingiverse.com/thing:2900617 you need to raise the whole printer a bit (20mm is enough). You can use simple blocks of wood to do it or a rubber cubes... I designed these feet to go…
remixed the Z endstop for wanhao to work with Malyan M150 onshape source: https://cad.onshape.com/documents/709f52ff0c2716e81a56bc12/w/2f7ac71d45eb9132ac30af89/e/0310fe934e70eeae77f49cbd the spring and the plastic cups you can see on the…
RAMPS holder for Malyan M150 source available on onshape attaches to the top of the box using 2 mount points original melzi uses, the other side of the holder should be either glued using hotsnot (what I did) or using double sided tape.…
I realised, that my new Malyan M150 Printer cant handle Flex Filament like "SainSmart" very well. So i took it apart and did a complete Design of the Extruder Part. Now no flex filament wont stop my printer! =) Print Settings Rafts: No…
Malyan M150 uses MK10 hotend, but I wanted to use Bondtech CHT nozzle which is compatible only with MK8 or V6 hotends, so I bought a cheap Creality hotend and made a conversion to fit it. Required: 4x M3x20 4x M3x16 2x M3x12 1x M3x10 4x…
I have an Alienware M15 R1 laptop; it's been 5+ years, and its rubber parts started wearing out, especially its feet; I had no alternatives to buy a spare online either. So I thought to restore it by rebuilding it in Rhinoceros and 3D…
Reverse engineered a replacement for a coworker's broken lawn mower. Seems that this part is unavailable from the manufacturer as a replacement and looks like it's only used on this one model. The original part is PA6-GF, but I think that…
Having recently bought a second hand Israeli M15 mask missing the exhale cover, I wanted to make one to take its place. This isn't a perfect model, but it appears to do the job.
An adapter to connect a Wuerth vacuum hose ((ISS / TSS / HWS FLEXIBLE CLIPS 4M ISS 30-L/40-M/50-L Art. N° 0702400312 EAN 4056807807720)) to Arwin MM1510-C Sander I realize it an extremely niche use case for an old machine, but maybe it…
I love this little laserprinter. It works fine for man years now. But recently, paper fails to feed into the printer. The paper tray normally folds flat on the table, and paper is pulled in horizontally. I found, that the printer grabs…
Gridfinity holder for the Franklin Sensors M150 Stud Finder
Created by MakeNow's SnapForm( https://makenow.crealitycloud.com )
I created this cover for my Alienware M15 R4 to use an external keyboard on it. First version of it, so it's not as pretty but it is functional. Make sure to mirror along X axis to get the left side of it.
These are replacement microphone clips for the Rockville RAM15BT V2 Powered PA Speaker. They mount in the same spots as the original clips and use the same screws. These can be useful if the original clips are broken, or if you use a…
This is a tool to remove the bezel on the Skilhunt M150. Printed using an Ender 3 V2 Neo with a stock 0.2mm nozzle @ 20% infill in PLA. Source files can be found here if you want to make adjustments:…
I created this fin to redirect the hot air coming out of the back of the laptop and prevent it from being recirculated back into the laptop. The cable holder is optional. It might work with other laptops as well.
This reducing fitting allows connecting two pipes with different thread standards: M15x1.5 metric thread on one side and G1/2 BSP (British Standard Pipe Parallel) on the other. Designed for shower systems, thermostatic valves, or any…
Having recently bought a second hand Israeli M15 mask missing the exhale cover, I wanted to make one to take its place. This isn't a perfect model, but it appears to do the job.
Created by MakeNow's SnapForm( https://makenow.crealitycloud.com )
Ive laying around a Mornsun PSU and want to switch the one that came with my printer and make a wisssss sound. Before explode ( joke ), I decide to switch. The new one is smaller, yet have more power, and some sources indicate that…
Das Gehäuse enthält einen Schnappverschluss, so dass es keine Schrauben benötigt.
