Wall hooks for towels by Jaroslav Troščák
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my design for towel hooks. by me
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 35
- Makes
- 0
- Views
- 252
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
Hi,
This is my design for towel hooks.
Screws: Use wood screws for mounting.
Pin Hole: Below the screw hole, there is a 2mm diameter hole for a shelf pin (as shown in the third photo) to prevent the hook from moving. Drill a hole for the pin first, and then drill a hole above it for the screw.
Placement: The pin hole is positioned 2mm below the center of the hook. To ensure proper alignment, drill the pin hole 2mm below the center of your wooden board.
I will also provide a model without the pin hole, allowing you to use only the screw if preferred.
If you like my design, please consider supporting my school by clicking on this link. As a passionate teen designer who loves creating and making models, your support would mean the world to me. Thank you! :D
https://www.paypal.com/paypalme/JaroslavTroscak