Wall hooks for towels by Jaroslav Troščák
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my design for towel hooks. by me
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 252
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
Hi,
This is my design for towel hooks.
Screws: Use wood screws for mounting.
Pin Hole: Below the screw hole, there is a 2mm diameter hole for a shelf pin (as shown in the third photo) to prevent the hook from moving. Drill a hole for the pin first, and then drill a hole above it for the screw.
Placement: The pin hole is positioned 2mm below the center of the hook. To ensure proper alignment, drill the pin hole 2mm below the center of your wooden board.
I will also provide a model without the pin hole, allowing you to use only the screw if preferred.
If you like my design, please consider supporting my school by clicking on this link. As a passionate teen designer who loves creating and making models, your support would mean the world to me. Thank you! :D
https://www.paypal.com/paypalme/JaroslavTroscak