Small Raspberry Pi 4 case with 2.5 HDD/SSD drive mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple raspberry pi 4b case with 2.5 HDD/SSD drive mount and gpio pin access.
- Rating
- 1 / 5
- Likes
- 15
- Downloads
- 152
- Makes
- 1
- Views
- 1,160
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple Raspberry Pi 4 case designed to hold a 2.5" HDD or SSD alongside the board. The layout allows for use with a passive cooling case, making it suitable for quiet setups where active cooling isn’t needed.
Hardware:
Along with the Raspberry Pi, SSD or HDD, and SATA-to-USB cable, you’ll need four M3x5 screws to mount the Pi onto the drive, and another four to secure the drive to the case sides. You can also use M3x5 or longer screws to fasten the case together, though this isn’t strictly necessary if you don’t mind a slightly looser fit.