1 / 4
Comparatror base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easily and accurately measures the height of the first layer while printing
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 16
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
Place the dial gauge in the hole (standard 8mm) and adjust it so that it reads zero, then place it on top of the first layer (skirt or brim is mandatory) and take a reading, adjust the Z offset on the printer interface, and measure again on the second pass (peel off the first)
Print with the two feet touching the buildplate so they are completly flat!