1 / 4
Raspberry Pi fan holder for M3 brass insert
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
40mm fan mounted with M3x5x4 inserts, does not constrain pins header.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 152
- Makes
- 2
- Views
- 505
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
40mm fan mounted with M3x5x4 inserts, does not constrain pins header.
There's not much to add. I did not have M2.5 bolts until recently so I simply re-drilled the Pi bolt holes by rotating the M3 screw there for a while everytime with no problems.
Height including the Pi is 15 mm, so 16 mm screws will extend 1 mm below Pi. 20-25 mm bolts are probably ideal, depending on what standoff you use.