Pole/wall mount for 1.5" Fibropool diverter valve.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For mounting Amazon's Fibropool 1.5" NPT Swimming Pool Diverter Valve to 4"x4" timber pole or to wall.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 188
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
This mounts Fibropool 1.5" NPT 3-way diverter valve to a 4x4 pole or to a wall. I am not affiliated with Fibropool or Amazon, I just bought this valve to split pump output off to my water slide and found it very awkward, no way to cleanly mount it, so I made this; hopefully it helps someone else.
Screws attach the mount to the wall and zip ties attach the valve to the mount. The 4 outside holes are for #8, #9, or #10 deck screws. The 4 inside holes (with channels between them on the back) are for heavy duty zip ties. The zip ties can be installed after the mount is already attached; Just bend the ends of the zip ties inward a little bit and they can be inserted from the front, they will follow the channel along the back, and pop back out the front out of a different hole. If installing outdoors use black zip ties, they are UV resistant; white ones aren't. I printed out of Polymaker Polylite PC but you can use whatever (again consider UV resistance for outdoor installation).