1 / 1
Hobie 16/14 Nylon Nut
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
5/16"-18 nylon nut used on rudder/tiller assembly in older Hobie 16s and 14s.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 44
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
These nuts were used in Hobie 16s and 14s until the mid-1980s. They were replaced by stainless steel nylocks (part #8050310), but still work pretty well. This design uses ANSI #5/16-18 threads. After printing, I ran the nut up and down a screw a couple times to clean up the threads. PETG or PA is recommended. Avoid PLA and ABS-- they degrade quickly in a marine environment.
Part #8050301 in the Hobie catalog.
Recommended Print Settings
| Material | Nozzle | Layer Height | Strength | Supports |
|---|---|---|---|---|
| PETG / PA | 0.4mm | 0.2mm | 100% infill | No |