Nextruder Nozzle Case (other thicknesses)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nextruder Nozzle Case (derivative) with other wall thicknesses
- Rating
- 4.833 / 5
- Likes
- 8
- Downloads
- 38
- Makes
- 6
- Views
- 291
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
While playing with the excellent Nextruder Nozzle Case from Little Mike trying to get the best-looking clear container, I found that a 0.6mm nozzle using the 0.40mm DRAFT mode (non-Input Shaper profile) in vase mode (single-wall) gave the best results while being sturdy enough. I have not tried with a 0.8mm nozzle, but made an STL for that as well.
This is a redesign of the case with a 0.6mm or 0.8mm wall, but keeping the inside shape to fit the original caps or the other available caps.
The 0.6mm-wall file is meant to be printed with a 0.6mm nozzle, if possible in vase mode. Best results with the non-IS 0.40mm DRAFT profile on a Prusa XL.
The 0.8mm-wall file is meant to be printed with a 0.8mm nozzle, if possible in vase mode. Best results with the non-IS 0.55mm DRAFT profile on a Prusa XL.
The photo shows a make with the 0.6mm file using Prusament Clear PETG (left) vs the original (right).
Note: Based on comments, the fitment with original caps seems to vary. For caps that may fit better, several of the makes have links to cap models.