Hobie 16 Mast Cleat
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Horn cleat used for halyards and downhaul on the Hobie 16 mast.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 98
- Makes
- 0
- Views
- 363
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Three of these cleats are on the Hobie 16 mast: the jib and main halyard are riveted; the downhaul is attached to the luff groove with special square nuts.
Parts required to install as a halyard cleat:
- 2x 3/16x5/8" 6-10 stainless steel pop rivets (#8010120)
Parts required to install as a downhaul cleat:
- 2x #10-32x1" stainless steel screw (#8030110)
- 2x #10-32 stainless steel square nut (#8051300)
I printed mine out of PA6-CF. PETG-CF or PETG-GF could probably be used as well. I recommend printing the cleat on its side to improve strength.
Part #10730010 in the Hobie catalog.
Recommended Print Settings
| Material | Nozzle | Layer Height | Strength | Supports |
|---|---|---|---|---|
| PA6-CF | 0.6mm | 0.12mm | 100% infill | Yes, tree |