Hobie 16 Mast Cleat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Horn cleat used for halyards and downhaul on the Hobie 16 mast.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 362
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Three of these cleats are on the Hobie 16 mast: the jib and main halyard are riveted; the downhaul is attached to the luff groove with special square nuts.
Parts required to install as a halyard cleat:
- 2x 3/16x5/8" 6-10 stainless steel pop rivets (#8010120)
Parts required to install as a downhaul cleat:
- 2x #10-32x1" stainless steel screw (#8030110)
- 2x #10-32 stainless steel square nut (#8051300)
I printed mine out of PA6-CF. PETG-CF or PETG-GF could probably be used as well. I recommend printing the cleat on its side to improve strength.
Part #10730010 in the Hobie catalog.
Recommended Print Settings
| Material | Nozzle | Layer Height | Strength | Supports |
|---|---|---|---|---|
| PA6-CF | 0.6mm | 0.12mm | 100% infill | Yes, tree |