Meshtastic Nebra IP67 mounting plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mounting plate to install a RAK Wireless (19007) Meshtastic node inside a Nebra IP67 case.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 51
- Makes
- 0
- Views
- 931
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Version 1:
A mounting plate for a Nebra IP67 enclosure to install a Meshtastic node based on the RAK19007 WisBlock board. Includes a mounting spot for a diymore 18650 battery holder.
Version 2:
A mounting plate for a Nebra IP67 enclosure to install a Meshtastic node based on the RAK19007 WisBlock board. Includes holes for zip-ties to mount an 1165110 10Ah LiPo battery. You can also mount the battery using 4"x2" self adhesive Velcro.
This version is designed to be used with a PoE to 5V USB-C adapter, mounted underneath the plate.
For best results (heat resistance) print in PETG, ABS, or ASA.
Additional hardware:
Version 1:
- 9x M3x8 SHCS screws to mount the plate in the enclosure
- 3-5x M2.5x4 screws to mount the RAK module (you only need 3 if you are not including the Ethernet module)
- 4x M3x4 screws to mount the battery holder
Version 2:
- 7x M3 20mm brass standoffs
- 7x M3x8 SHCS to mount the plate to the standoffs
- 3-5x M2.5x4 screws to mount the RAK module (you only need 3 if you are not including the Ethernet module)
Links:
More photos to follow as the equipment gets delivered and installed…