Prusa Mini Y Axis Belt Holder (PPVariant)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An improvement to the Prusa Mini Y axis belt holder. Fixing the main issue with the factory design.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 62
- Makes
- 0
- Views
- 235
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
After having issues of the belt slipping out of the Y axis on the mini for years in our farm environment. Constantly reprinting the original design, or some of the other "fixes". But they all suffer from the same flaw, after a while the belt will slip out from heat (unless for some reason I print it in PC or ASA) so instead we went and took reference from the i3 printers and applied the idea of their belt holder, or the older design. And thus our variant of the belt holder was born. Currently close to 500 print hours later and its holding up fine. All you need to upgrade to this are some M3 bolts and M3 Nuts.