1 / 7
Aircraft Parking Brake Sensor Van's RV-14
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D parts to hold a Limit Switch
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 254
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted an indicator that my parking brake was on within my Primary Flight Display. I used the stall horn limit switch and other parts from that to provide the indication that the parking brake is set.
-This uses:
Aircraft Specialty Bracket (and hoses) and
the Beringer Parking Brake valve, and
Limit Switch and HW from the RV-14 Stall sensor
Printed in PETG, which uses less than 11 grams of filament. I also turning on supports and the base has a path for the limit switch wires to pass through to keep the wires organized and out of the wat of the mechanism.