1 / 5
Avocado Seed Starter 2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It has an in-built stand for the seed, and drainage holes into the water holder. Can transfer out when it grows.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 36
- Makes
- 0
- Views
- 289
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Standard PLA+ settings.
I printed with 0.3mm first layer and 0.2mm layers after, 5 perimeters, 6 (Top) and 5 (Bottom) horizontal layers, extra perimeters if needed turned on, random seam position with fill gaps checked on, 60% gyroid infill, 30% infill/perimeter overlap, and 2C over typical print temperature (for me that was 230C for PLA+ when typically I print at 228C for my printer). No supports needed.