1 / 8
Spektrum Replacement DX6i Roller Menu Scroll Button
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spektrum Replacement DX6i Roller Menu Scroll Button
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 38
- Makes
- 0
- Views
- 215
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Spektrum Replacement Roller Menu Scroll Button with metal hex shaft for roller sensor. For DX6i, DX7S, DX8, DX9 transmitters.
- 0.12 mm layer
- 15-30 mm/s
- PETG
- 1.6 mm hex wrench
Insert hex wrench into button side and protrude appropriate amount to fully engage roller sensor. May need to test fit in transmitter. If tolerance of hex wrench is on the low side a bit of glue might be needed on the hex wrench (ENSURE TRANSMITTER FIT IS GOOD PRIOR). Glue hex wrench into roller button and cut off remaining button side of hex wrench with Dremel.