Hack Pack IR Turret Heavy Arms upgrade (WIP)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
who needs accuracy when you have quantity
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 170
- Makes
- 1
- Views
- 2,705
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
IR Turret “Heavy Arms” Mod - Crunch Labs Hack Pack 001
This is a work in progress (print at your own risk)
This is a 3D-printed gear system to use the existing ROLL servo to rotate 4 other barrels to fire 4 times the ammo. no coding changes required this is purely a physical mod.
I have a stock ender printing at very low speeds.
3D Printing Info
- Print Time: Approximately 34 hours (including barrels), 19 hours without barrels
- Material: PLA/PETG
- Supports: Add supports for barrel-gears
- Infill: 15%
- Layer Height: 0.2 mm
- Perimeters: 4 mm
Instructions:
- add the 4 small-gears to the 4 closest mounts and secure them in place with the smol-shafts and caps (might need some super glue in the cap if it doesnt stay on.
- attach the 4 barrel-gears the same way using the big-shafts and caps
- remove the #3 Roll servo motor from the build and unscrew the orange default gear.
- install the servo into the new plate in the same orientation and screw the driver-gear onto the servo motor.
- attach the barrels to the barrel-gears
- attach the barrel caps (download from crunchlab's thingiverse) to the barrels (make sure you align the prongs
- should be good to go.
Issues:
- v1 plate's firing mechanism sometimes jams against the darts and not fire
- the barrel closest to the pitch motor will have darts jam there as well
- very top heavy, might need stronger pitch motor
- reloading darts is very very challenging
Additional Notes:
I tried looking for paper tubes at Michaels and Staples near me but couldnt find the right size. so i modeled the barrel for mine. if you can find paper tubes i would recommend it to reduce weight.
You can download the barrel cap from Crunchlab's thingiverse: https://www.thingiverse.com/thing:6592454/files
The barrel-gear is remixed from Crunchlab's Barrel_nock_cap_v1.stl
For additional darts check out these stls by members of the hack pack community:
- https://www.printables.com/model/893592-ir-turret-nerf-bullet-no-rubber-band-crunchlabs-ha
- https://www.thingiverse.com/thing:6641775
Update: plate-v2 introduces a ramp to hopefully push the darts off for firing.