435 models
This is a little quad-legged robot with gun turret. All parts are flexible but stiff to make posing and stop motion animation possible. Easy print without needing any supports. Parts snap together except the turret which is print-in-place.
This is a movable turret for installing a direct drive sprite extruder onto Creality Ender 3. The loom cable passes through the hole left from your old Boden extruder. It enables full extension of the X,Y and Z axis of your printer with…
For M4x30mm screw and 4 sided nut. For 30.5mm diameter lens. Hole for lens, need to by modified, depend on lens you get for.
For M4x30mm screw and 4 sided nut. For 30.5mm diameter lens. Hole for lens, need to by modified, depend on lens you get for.
Modified eye piece for ByteSlinger's Portal Turret Pumpkin.
Turret cap that can be used on a zeis terra rifle scope. NOTE: i dropped my scope and consequently broke the cap lid and the adjuster turret, so to use this scope cap, the original turret must be removed. i printed a more low profile…
Beschreibung: Ersatz Rolle für die IR Turret von CrunchLabs. Das original dreht sich nicht leicht genug, die Magnete sind vermutlich zu stark. Das obere und das untere Endstück der Rolle sind original von CrunchLabs hier zu finden:…
The Battle Front 1/100 Centurion tank sprue gives parts to make either a MKI or a MKIII tank. They both use the same hull. All the parts are there to make the turret for both versions except they only give you one turret base. I wanted to…
“I'm afraid of heights” - Apparently these are afraid of heights, so try to keep it lower on the tree. Its rather large, so feel free to scale it down in the slicer :). “Are you still there?”
UPDATED June 19, 2024: Changed to make it more modular and waste less filament. Experiment: I want night vision on my boat. There are a couple ‘reasonable’ consumer options - Black Oak Nitron XD and Sionyx Nightwave. Sure, they're great……
I wanted a compact Missile Turret style pencil holder that fit in a 2x2 Gridfinity space. I ended up creating this model in 3 pieces. Holds 12 pens/pencils. **Due to the advancements in accuracy of 3d printers I have found that the…
This next test involves turrets. You remember them, right? They're the pale spherical things that are full of bullets. - GlaDOS Dont worry, 3d printed parts cannot shoot bullets or sing a song… yet. Here you can download and print your…
FULL BUILD GUIDE FOUND HERE Contains all information about building the turret, including a BOM. DISCORD HELP SERVER FOUND HERE Find me and others who have built the turret and are here to help.
To rotate the turret, gently twist the turret after printing to break the connection. Two turret designs. It can be printed without support as in normal Benchy. Category: 3D Printer Accessories
Generic flat bottom tank turret to fit robot vacuum cleaners. Simply scale to suit your robo cleaner then print and use some double-sided tape to secure in place. Print 1, 2 or 3 to get the desired armoured look for your cleaner Check out…
Automatic Nerf dart turret 2 Axis Gimbal Raspberry/ESP32 controlled Integrated speed measure Max dart speed 140KPH Project GitHub Updates Removed RPI from the BOM 15.08.2023 - New video - Youtube 06.03.2023 - Added wiring diagram, Android…
Consider following me on Instagram (@SMACKMAX_). I try to post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ ---------------------------------------------------------------- 16-10-2024 small…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Remix from: https://www.thingiverse.com/thing:4600435 Same seige tank, but you can move the turret now. Supports required. Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Yes Infill: 20% Category: Vehicles
This is a static model about 40cm high with room for electronics, it is the same size as this movable tracking model from which also contains instructions on how to make the legs:…
A spacer for the Unifi G5 Turret Ultra to give some room for the cables behind it.
Miniature version of the automated turrets found all over the Commonwealth and West Virginia. Has a little compartment in the top, that can be used to securely store your nuclear lauch codes :) The base and the barrel can be printed…
I made some changes to Usuarius great Rust Auto Turret design to fit the Arduino Nano and all the cables inside, add a lid to the bottom and some more housing to the laser. It's now self contained and just needs a usb power source like a…
Modelled as closely to the original as I could, while optimizing for printing. Arms open & close. PLEASE READ: You will need a small length of sturdy wire to attach the legs, unless you are printing the solid resin version. I used the…
It's a Portal turret shaped more like an egg that can open like the actual turret in-game! Notes: - Every stl was positioned for the recommended printing orientation. - The 100% egg is 8cm tall (without antennae) and 200% egg 16cm…
Mini Turret is a terrain piece that can be used as an aesthetic or as part of a scenario. Support: Base: No support Beacon: No support Minigun & Autocannon: Rotate about 50-55 degrees like shown below. Support on buildplate only, and…
Ive tried to recreate the sniper turret from the video game "The Division 2" by Massive Entertainment. Goal was to stay as close to the ingame model as possible and also make it easy to print. Leave a comment if you like or have problems…
ø87 mm 30 degree angled mounting bracket. i'll add some 10 , 15 , 20 , 22.5 , 25 , 35 , 40 , 45 degrees later and also add a version with a cutout for cabel.
Lots of people wanted this model to be more stable, so I re-designed it a bit and made it into a single piece for print. Holds 12 pens/pencils. I also added a little satellite dish to the top of it for fun. Dimensions: 79.15mm long,…
me gonna put person on mg cause yes
Cut of the Halo warthog chain gun. https://www.thingiverse.com/thing:2638418 You could add this to other custom makes or toys. Category: Sculptures
I built a 3D printed foam dart turret with streaming video controlled from any web browser on the local WiFi network. It's powered by a raspberry pi 4 and three servos for the X axis, Y axis and firing control. You can see a video of it…
A rotating base for turrets, pan-and-tilt mounts, launchers, and swinging arms. The ring gear opens to an 81mm inner diameter. A thrust bearing stack carries the ring, so it takes the radial load from the ring itself and the lateral push…
u might have to glue the turret mg in sadly:(
A fully print-in-place version of the World of Warships Iowa model with rotating turrets. I've removed all the tiny details, enlarged the gun barrels, made some surfaces thicker and so on so it's possible to print it in one piece. The…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) Brawl stars is a player-versus-player game…
The tracks are NOT friction fit, use a bit of glue for them. Turret supports can be difficult to remove, use extreme caution, or you'll rip off the MG or some other accessory, I also included an empty turret and extra parts, for if you…
DIY IR Turret V2.0 - Inspired by CrunchLabs' HackPack This is the SECOND version of my own 3D-printable version of the IR Turret inspired by CrunchLabs' HackPack. I built this project as a personal challenge after realizing the kits…
Print the turret facing upwards, vertically. Use adaptive infill to make the barrels and blast bags portions 100% infill. You will need a lot of support for the turret, so use a support brim. No support is needed for the storage barbette.…
A fun protective tower for the competition. Vacuum robot can rotate 360 degrees. 2 parts that can be printed individually. Simply glue it onto the robot and a small cannon will drive through the living room. (No shooting function! For…
From Wikipedia: M113A3 TUR – Otherwise known as the TLAV (Tracked Light Armoured Vehicle) or LAV-T is an APC version of the M113A3 standard equipped with a Cadillac-Gage 1 meter turret taken from a AVGP Grizzly, armed with a M2HB .50cal…
I couldn't find a Unifi G5 Turret Ultra under eve mount anywhere online, so I decided to make one myself. The holes on the printed mount line up with the base of the camera. You will need to trim the 6/32 screws down to about 6mm using…
This is a model based on Torbjorn's Turret from the massively popular Overwatch game. It has been scaled to sit at 50cm height. Pieces have been sliced down to fit most 3d printers but if they are still to large, you can use tools like…
The Guardian Turrets acted as watchmen in key locations during the great calamity. Though they are entirely immobile, the head extends out from the body when alerted. The head and extension are connected to the main body with two…
Stand for Lee Classic turret 4-hole turrets, with shellholder. Various calibers and a blank stand. Printed in PLA on Bambulab X1C.
put cotton were the turret thingy is so it can create friction
cool t72 with movable turret and barrel
This accessory replaces the standard single objective nut with a three positions rotating turret. This way you can "zoom in" or "zoom out" selecting a different magnification objective. Bill of Materials One set of printed parts, printed…
might be a bit to small so I didn't make the barrel move
The turret can spin! Check the reference image to remove the support pins. The regular-sized one matches the size of my other Helldivers model. Feel free to adjust as you like! The turret is designed to be facing backward for easier…
You should know how to assemble it.
This is a helpful accessoire when you want to deprime only on your Lee Precision Turret Press. After inserting this piece into the slot, the used primer will be redirected to the back hole. The piece clicks onto the rod and fits snugly…
IR Turret PIR Mount - Crunch Labs Hack Pack 001 Overview This is a 3D-printed mount designed to securely hold a PIR motion sensor ( Keyes PIR Motion Sensor Module HC-SR501 ) onto the CrunchLabs IR Turret from the Hack Pack. This lets you…
This is a set of desk models that I created to be easily printable (as opposed to if you ripped the game files) and have turrets that can rotate and be interchanged. Requires only glue and no other tools to assemble. I recommend printing…
Printed this with the wall side on the print bed so you don't need supoprts
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/e1V2Qezh6rN Category: 3D Printing
Gidday Diogo, I've done whatI can but it will need some serious thought into where what and how these parts wil exist as there was lots of double ups and over lapping. This was the best way to get the parts and try and fix the errors that…
Electrical box cover that enables mounting a Unifi G5 Turret Ultra to an electrical box. The G5 Turret Ultra mount's holes are not aligned with the holes in a standard electrical box. I modified an existing design by adding four holes for…
print with 3 or more walls, 10% or more infill rest is self explanatory (after rendering the recessed holes were enlarged to accommodate larger screw heads - 10mm)
IR Turret “Heavy Arms” Mod - Crunch Labs Hack Pack 001 This is a work in progress (print at your own risk) This is a 3D-printed gear system to use the existing ROLL servo to rotate 4 other barrels to fire 4 times the ammo. no coding…
Made for M.S.W Wetzlar 4x36. Should fit almost any turret with m20x0.5 threads.
UniFi Camera Mount G5/G6 with Hidden Cable Space (Junction Box for UniFi G5 / G6) This elevated camera mount works as a junction box for turret cameras (+ bullet adapter) and provides additional space to hide and protect cable connectors…
DEUTSCH: Eine Adapterplatte zur Befestigung einer ubiquiti G5 Turret Kamera auf einer typischen runden 68mm Unterputzdose. Von der Rückseite (die Seite mit dem zusätzlichen Ring darauf) werden Einschmelzmuttern für M3 eingebracht Die…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4GTceEOOOpH Print Settings Printer: Cetus 3D Mk2 Rafts: Yes Supports: Yes Resolution: 0.05mm Infill: 99% Filament: Rigid Ink PLA Grey Category: Vehicles
DIY IR Turret - Inspired by CrunchLabs' HackPack This is my own 3D-printable version of the IR Turret inspired by CrunchLabs' HackPack. I built this project as a personal challenge after realizing the kits weren’t available in my country…
I convert a .pdo file (papercraft) to a 3D printable object. I have not tested the print yet. Do not hesitate to leave your impressions. I will shortly convert other objects, including Portal. Original pdo file is from Evgeniy Pelevin…
This is a simple battleship (self-designated Endeavor-class), based loosely on the pre-dreadnought battleship Mikasa and other battleships of that era ( https://en.wikipedia.org/wiki/Pre-dreadnought_battleship ). This model is relatively…
Hawke Telescopic sight scope turret cap, for Hawke Varmint series telescopic sights but may well fit other models with ~23mm turrets. The internal thread was custom-specified in Fusion360 as an additional IsoMetricprofile M23x0.6mm. This…
Here's a simple generic "all gun" destroyer model (self-designated Bantam-class), I designed as an exercise in learning FreeCAD. The turrets are print-in-place and can rotate. Just wiggle and twist them after printing to free up the…
Turret mounted weapons for the Gaslands tabletop game. Category: Vehicles
Created this holder to mount a G5 Turret Ultra on a square pylon. It has two fixation holes on both sides. You will need M3 inserts for the 4 holes to hold the camera. And you can pass the network cable through a 22mm hole in the middle.…
A Sci-fi bunker with gun turret built in 28mm scale for wargaming. The turret has a hole for a magnet to make it free sp
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
IR Turret Nerf Dart - Crunch Labs Hack Pack 001 Overview This is 3D-printed replacement ammunition. No rubber band is required . The spring is 3D-printed. 3D Printing Info Print Time : Approximately 30 min on Prusa MK4 Material : PLA/PETG…
too much voids and incostitincies in chassis so I wont be slicing it sadly
Time to repair that damaged FightTech Mecha! A replacement part for the top turret for the Behemoth / Stone Rhino Mech (you know, just in case it was damaged in battle or you got one without it from somewhere in the Periphery...). This…
Turret caps for the Vortex Viper HST scope. These do not come with them from the factory and while hunting they have a tendency to get turned. I have two designs. A smooth design and one with a lip. The smooth design is difficult to grip…
Simple wall mounted holder for the lee 4 hole turrets. I do not know if these will fit the 3/5 hole turrets. If the 3/5 hole turrets DO fit, feel free to let me know and I will update the description.
took to long to export so did it seperatly
I only found 1 picture with the rocket so its not very accurate but idc
Base for mounting the Unifi G5 Turret Ultra on a wall or ceiling where the cable is fed from the side. The included cable connector / dongle is rather ugly, so I designed a base which conceals the cable and part of the connector. Use 4…
The summary says what it is and does. I created a bracket to snap a Streamlight Nano onto the front post of my Lee Turret press so I can see into cases a little better to verify powder charges before seating bullets. Not the prettiest,…
UPDATE (2019/10/19): Completely redone from scratch to be easier to print and customizable. Also got rid of the wobble. A cute, simple tank toy with a spinning turret. I have provided a F3D (Fusion 360) file to allow you to customize the…
This model is compatible with the lego system.
Unifi G5 bullet junction box mount and G5 Turret Ultra
Scifi Turret with 2 Guns + Seat for Action figure Different combinations Print layer height 0,16mm
A young friend of mine had lost his second castle turret top piece. At the time I had just received my Prusa and was eager to show it off. I printed it at 0.1mm layer height with supports only under the floating castle elements on either…
