Shelby Cobra - Print Ready
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shelby Cobra - The parts can be printed as they are. Please read the description!
- Rating
- 5 / 5
- Likes
- 1,126
- Downloads
- 2,635
- Makes
- 5
- Views
- 21,951
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There are basically only 3 print processes: the body, the tires, and the finer details.
I printed everything except for the tires and the body in gray , some were painted red if necessary. All gray parts were printed with 0.2 nozzle and 0.12mm layer height for more detail.
I had to shorten the front cooling part to make it fit into the hole.
I printed the body upright with 0.4mm nozzle a 0.2 layer height. Otherwise, the layers will be too visible. My recommendation: Do not print flat!
I sprayed the body with clear varnish.
The mesh of the body has some floating parts, but Cura automatically fixes this for me.
The tires were printed as follows: Rotate the front tires by 10 degrees in the printing program of your choice so they can be printed flat with support. with 0.4mm nozzle a 0.2 layer height.