Printable Broom Head
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This 3d printed broom head uses bridging techniques to print the bristles.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 75
- Makes
- 0
- Views
- 341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
GENERAL
This model fits the standard thread for wooden broom handles. you will need to make sure in your slicer that the bridges will form properly,
PARTS LIST
1 X Printed part
1 X broom handle with threads
QUALITY
use 0.4mm line width. bristles are tuned for 0.4mm nozzle.
use 0.2mm layer height. the bristles are tuned for this layer height.
use PLA for best bridging performance.
3 walls, 15% infill
make sure cooling is enabled, whatever setting you use for best bridging.
ASSEMBLY
cut the slab from the bottom of the bristles with a sharp knife or tool. screw the broom handle into the threads. you can shape the bristles if you need to by cutting them.