1 / 2
BTT CEB (CAN Expansion Board) housing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small housing for the BTT CEB. Stick it anywhere you want with a little VHB!
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 79
- Makes
- 0
- Views
- 736
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
A little enclosure for the BTT CEB. It‘s mountable to wherever you might need it to be with a little VHB or other double sided tape.
You will need:
- x5 M3x8 BHS.
- x5 M3x5x4 heat set inserts.
- little bit of VHB or double sided tape.
- Zip ties to secure the cables.
The lid is solid, but you can make it have any infill pattern if you chose to not include any top or bottom layers. Try to keep 5 walls for that part though to make sure that the screws holes are joined to the outer walls.