Base for Phone car holder / Základna pro držák telefonu do auta
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.84 – €1.03 net (excluding VAT)
For file: Phone_car_holder v5_0.4n_0.2mm_PETG_MK4IS_55m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.93 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 54.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Car phone holder base for the CD slot for my purchased holder, the base of which does not fit the Skoda Octavia II.
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 311
- Makes
- 1
- Views
- 1,952
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Car phone holder base for the CD slot for my purchased holder, the base of which does not fit the Skoda Octavia II.
It is compatible with iOttie and Swissten holder (sphere diameter 17 mm).
Use M3x18 screw and hex nut to connect body and ball.
PETG wraps in sun, i recommend ASA/ABS (and brimm)
Note:
If you like this model (which is not behind a paywall) you can buy me a coffee.
Základna držáku telefonu do auta pro CD slot pro můj zakoupený držák, jehož základna nepasuje na Škoda Octavia II.
Je kompatibilní s držáky iOttie a Swissten (průměr koule 17 mm).
Pro spojení těla a koule použijte šroub M3x18 a šestihrannou matičku.
Pozn:
Pokud se vám model líbí nebo vám ušetřil čas atp, můžete mi koupit kafe.