One Wheel Board - Made for Dummy 13 and Finger Scale
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A little One Wheel board for dummy 13 or for your fingers if you're into Tech Decks
- Rating
- 0 / 5
- Likes
- 58
- Downloads
- 163
- Makes
- 0
- Views
- 1,043
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution
The model “one_wheel_rim_bearings” uses 2 - MR126-2RS Bearings 6x12x4mm. Stick two bearings inside this rim, print 2 of the outer rims and stick all of this in the “one_wheel_tire.stl” printed in TPU (.2 mm layer height, 2 walls, 0% infill).
If you're not using bearings, just print either the board with magnets (compatible with my dummy 13 magnet boots) or the one without magnets, the axle and the “one_wheel_tire_no_bearing.stl” Printed with .2 layer lines, 15% infill, 3 walls on the board and tire, 6 walls on the axle.
Bearings I used - https://www.amazon.com/gp/product/B09DJY6K5G/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1