1 / 2
Contour Duplicator
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
11cm contour duplicator with either 10mm sliders or 1mm sliders
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 36
- Makes
- 0
- Views
- 740
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Screws needed:
- 4 M4x10 screws
- 1 M6x10 bolt
A simple contour duplicator using sliders that you can tighten or loosen. There is an option to use 10mm sliders and 1mm sliders. For 1mm you can print them in different colors to indicate each cm. I printed the 10mm version mysefl and I didn't really have a need for either a bottom or the side bolt. If you will be using 1mm sliders I recommend using both the bolt and the bottom since the 10mm were tight enough to hold eachother inside the base.