1 / 4
Guide Rail Adapter Bosch FSN to Makita DRT50
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter to use a Makita DRT50 router on a Bosch FSN guide rail.
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 215
- Makes
- 1
- Views
- 1,545
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
The adapter comes in two parts: the base plate and the guide rail adapter.
To connect both you'll need:
- two 5x16mm bolt screws
- two wing nut (5 mm)
- two 5mm washers
The bolt screws have to be pushed into the baseplate (I used a hammer, but carefully!).
Note: The base plate needs to be printed with support (for the bolt holes).
Note 2: in the pictures the base plate says "65mm" as distance between the center of the router and guide rail, but it's 70mm. That is corrected in the stl file.
