1 / 4
Guide Rail Adapter Bosch FSN to Makita DRT50
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to use a Makita DRT50 router on a Bosch FSN guide rail.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 212
- Wydruki
- 1
- Wyświetlenia
- 1538
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (78)Powiązane
The adapter comes in two parts: the base plate and the guide rail adapter.
To connect both you'll need:
- two 5x16mm bolt screws
- two wing nut (5 mm)
- two 5mm washers
The bolt screws have to be pushed into the baseplate (I used a hammer, but carefully!).
Note: The base plate needs to be printed with support (for the bolt holes).
Note 2: in the pictures the base plate says "65mm" as distance between the center of the router and guide rail, but it's 70mm. That is corrected in the stl file.
