1 / 6
Sovol SV06 5020 part cooling fan duct for Volcano nozzle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fan duct using 5020 blower for SV06 adapted to use Volcano nozzle using melt zone extender and stock heater block.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 55
- Makes
- 0
- Views
- 573
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a fan duct using 5020 blower fan I use with my SV06 adapted to use Volcano nozzle using melt zone extender and stock heater block.
Use at least PETG to print this, ABS/ASA is recommended.
You'll need:
- 24v 5020 blower fan using JST 1.25mm 2 Pin,
- two short M3 screws (I used 8 mm) and nuts
- one M4 screw 28mm or slightly longer
You should be able to reuse screws from the back of extruder mount to attach the duct frame. Two “insets” on the top of the frame should allow for some cable management.