Prusa Enclosure Door Upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.24 – €1.51 net (excluding VAT)
For file: EnclosureGapFiller_0.4n_0.2mm_PLA_MK4IS_52m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.38 excluding VAT (range midpoint).
- Weight reported by the author
- 28 g
- Print time reported by the author
- 51.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a two-part design that is intended to remove the gap between the two swinging doors on the Prusa Enclosure
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 99
- Makes
- 4
- Views
- 1,128
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
The Official Prusa Enclosure comes with a lot of air leak points, @BuildX has an amazing solution to this problem. He offers solutions to fix just about every air leak point. However, I was unable to find a good solution to gap between the two swinging doors.
This model is intended to remove the air gaps between the two swinging doors on the Official Prusa Enclosure. This also allows you to open both doors at once. I printed this in PLA, 0.20mm layer height, 4 perimeters and 30% infill. It should be noted that when printing the two parts, you will want to flip one of them on the build plate to maintain the same texture when attached on the enclosure. This is already done on the provided GCODE.
When attaching this, make sure to replace the M3x8mm screws with M3x12mm screws. There are extras that came with the Prusa enclosure (and printer).