Omnifixo generic case 5x3 magnets
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.53 – €6.76 net (excluding VAT)
For file: omnifixo case_0.4n_0.2mm_PETG_MK4IS_5h0m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.15 excluding VAT (range midpoint).
- Weight reported by the author
- 108 g
- Print time reported by the author
- 5 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Modified Omnifixo case with a generic compartment rather than a Pinecil one, and embedded 5x3 magnets.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 25
- Makes
- 0
- Views
- 504
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Since I don't own a Pinecil, but otherwise liked the Omnifixo Pinecil Case design by @PosterBored a lot, I replaced the Pinecil compartment with a generic compartment. I also had different magnets on hand (5x3 cylindrical), and I prefer to hide my magnets by inserting them mid-print, so I removed the original magnet holes, and used PrusaSlicer negative volume to create new ones (so you can edit them in PrusaSlicer to suit your needs).
Since I'm pausing the print to insert the magnets mid-print, I also recommend changing the filament color for a nice finishing touch.
Testing the magnet strength, they seem to hold under ‘moderate’ shaking, but if I shake it with enough force, they let go. It's obviously weaker hold than if the magnets were on the surface, but I'd say it's still good enough. YMMV.