Print in place Contour Gauge / Duplicator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A easy print in place Contour Gauge with 3 different holes.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 113
- Makes
- 1
- Views
- 758
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My first attempt for a Print in Place tool.
Therefore I designed a easy small print in place Contour Gauge.
Smallest distance: ~26mm
biggist distance: ~94mm
The Tolerances are set to 0,15mm in the middel and 0,2mm at the top/bottom.
To hole the middel part, just squees the outer part a bit and move the gauge to duplicate the contour.
Printparameter:
Layer height: 0.2 mm
Line width: 0.4 mm
Walls: 3
Infill: Cubic 10%
Support: no
Printtime: Around 40 minutes
Used Filament: Elegoo PLA+
Used Slicer: Orca 2.0.0
Used Printer: Elegoo Neptune 4 Pro
I hope you like it as much as I do!
In case you have suggestions for improvements, please contact me!