195 models
This tool accomplishes a goal that few other tools can: copy bigger complex contours. Place the Duplicator against any curvy contour with the arrows visible and pointing to the contour. Carefully transfer it to the medium (or even a…
Heyho :) Yesterday I set myself the task of designing a relatively complex and completely 3D printable contour gauge. Here is the result :) Small disclaimer: I know this tool has many individual and small parts! So make sure your printer…
Contour Gauge Duplicator with lock Printing of the cover part stops 2times for color change (black, red, black in my case) Need : M6x30mm hexagon screw and a M6 nut (M6x30mm min) Four 3x15mm woods screws Need : 1 red slider 6 blacks…
Contour duplicator with wooden ice sticks Simple tool to use with wooden ice sticks 114 x 10 x 2 mm. Partlist: 2x ISO 4762 - cap screw - M3 x 12 2x ISO 10511 - self locking nut - M3 Model printed with: Prusament PETG prusa orange
Slide duplicator for Canon lens with a reverse ring. It can transfert 24x36mm slides on a 50x50mm frame. I use it on my Canon 50mm f/1.8 EF lens. For the assembly, you'll need: 6 M3x8 bolts + nuts 1 or 2 M3x10 bolts + female threaded…
How offten you need contour duplicator? So in the time when you don t need it, you have at least fidget toy…;) You could choose between two extension, classic pen holder, or holder for Pica Dry pen.
This contour duplicator is fully print in place. The two tabs allow to pinch the individual rods to secure the shape of the contour (sort of, it is very dependent on the quality of the printer). Print in PLA with your usual parameters. I…
This is my attempt on making the printer head lighter and more precise. It utilizes a BambuLab hotend, or in my case a very good copy, and the BondTech extruder made for the Wanhao D6. Also remote cooling with CPAP-tube. My goal is to…
Couldn't find a tensioner for the Wanhao Duplicator i3 Plus Mk2 (only i3 Plus, which has a different carriage design) so I made one. It has the correct standoff from the carriage for good belt alignment, and is low enough that it doesn't…
Requirements: • Dremel (with 3/4-12 threads - this could easily be edited in the Fusion360 file) • 1.5mm end mill/milling bit • 1.5mm drill bit • Drill (to clean out the small hole in the Top) • Various screws This is a car key copier…
No support needed, but I used brim for contour duplicator body to have better adhesive.
My first attempt for a Print in Place tool. Therefore I designed a easy small print in place Contour Gauge. Smallest distance: ~26mm biggist distance: ~94mm The Tolerances are set to 0,15mm in the middel and 0,2mm at the top/bottom. To…
The original cable chains for the Wanhao I3 are very small and impossible to pull the servo leads through without disassembling the connector. So I switched to a 10x15 cable chain with small doors on each link that makes routing cables a…
Glass clips made to fit my Duplicator i3 Plus printer with an aftermarket 3mm glass bed. Print four clips, they should snap in snugly with the pointed radius around the spring. Print Settings Printer Brand: PowerSpec Printer: Duplicator…
Slide duplicator for Canon lens with a reverse ring. It can transfert 24x36mm slides on a 50x50mm frame. I use it on my Canon 50mm f/1.8 EF lens. For the assembly, you'll need: 6 M3x8 bolts + nuts 1 or 2 M3x10 bolts + female threaded…
Dampeners for Wanhao Duplicator I3 Plus - Balco Touch - maker select Just to clarify this thing was primarily designed as a vibration dampener to reduce ghosting\ringing by reducing vibration transfer from the work surface but may also…
Update: 22_03_18 File: BD62-3mm_22_03_18.stl Raised base of duct an additional 3mm from the Build plate to allow greater clearance if using Bulldog Clips to hold glass plate down. Clip nearest to home may still require pulling off a…
### **DIY Film Digitizer: Introduction and User Manual** video： https://www.bilibili.com/video/BV1XS4y1R7fk/?vd_source=e6ca9bac2b0dc76c5baabe7a670daf9a **Introduction** Welcome to the DIY Film Digitizer, a customizable solution for film…
Additionally with M3x12mm screw and nut.
I'm having a bad week for print-in-place designs, so after failing to get a couple existing ones to work, I came up with this. The design includes an 2.4mm (0.09") offset between the parts to accommodate the scrap Plexiglas I had on hand.…
Assembly is simple, simply highlight the two lengths of screws and the nut for the center accessory is deeper than normal. His name is engplaca.
Wanhao Duplicator i3 V2.1 E3D Titan Aero Upgrade. Upgrade your Wanhao Duplicator i3 V2.1 to use E3D's Titan Aero ! Use the complete range of E3D Heater Blocks & Nozzles | http://e3d-online.com/ I have also added in a few modifications to…
X Axis Belt Tensioner for Monoprice Maker Select V2 (Wanhao Duplicator I3 rebrand) Wasn't happy with any of the many existing X tensioners for this printer either having clearance issues with my other mods, or having a bolt that's far off…
After getting my Prusa MK3S+ I wanted to improve the quality of my older MonoPrice Maker Select Plus machines. I've always struggled with an uneven bed and some exterior wall artifacts. I also found some wobble in the x-carriage. This…
Important : This model was only tested on the Wanhao duplicator I3 mini, it should work on any clone with the same fixation. Please, post a comment if it doesn't quite fit or if it needs a modification to work on your printer. Reasons :…
This is a remix of https://www.thingiverse.com/thing:2750908 originally made by parhamdb . It also uses the mounting tabs from https://www.thingiverse.com/thing:1686028 by mmoore0 . Before I got a Prusa printer, I had a Monoprice Maker…
I didn't have the appropiate spacers - so I designed and printed them. Tehy are sized to be used with standard M4 hex nuts at the bottom. First insert all 22 nuts in the holes, then add the spacers. They are a tight fit and might need…
I re-designed Pawpawpaw85's strain relief to have a lower profile so there is zero chance of nozzle coolers interfering at maximum Y-extension when using PEI/Buildtak adhered directly to the heatbed. This design has an elongated nut-trap…
Rotate to print flat side down. I used 20% infill, no need for more. Very quick and small print. The screws that come with the BL-Touch will cut their own thread, you may need slightly longer screws for your extruder fan as it mounts to…
Wanhao I3 Duplicator BLTouch Bracket When I was upgrading my Wanhao Duplicator I3, I looked into adding bed levelling to the printer. To do this, I used the BLTouch unit and upgraded the Wanhaos firmware to incorporate this sensor. Doing…
I mad this wheel to guide filament if the spool is set up on the control box instead of on top.
The Cable Chains on the MP Maker Select V2 are not being properly utilized in factory form. Chains need to be constrained, so that they ‘unroll’ gradually across their motion, to spread cable flex out along its length and extend lifetime.…
here is a great 40mm alternitive to the stock cooler. i printed it in pla and tested this on some long builds (12 hours+) and no melting . worked great.. i also added a lowered one . its 0.50mm lower to realy get it as close to the plate…
Wanhao I3 Duplicator Camera Mount I really like the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 by sneaks, so much so that I decided to create a mounting bracket for the Wanhao so I could reuse the articulating arm. The…
This is a mirrored BLTouch Sensormount designed by dot_bob. For the Duplicator 6 plus the left side would be better because the printhead fan is disturbing the rightside Sensormount. Please be aware that you have to adapt the marlin…
This is one of my older designs I did a few years ago. It still gets quite a few hits on Thingiverse and I figured it might help a few people here. UPDATE 2: Wow! Been awhile and I'm glad to see my files have helped a few people. I have…
I recently printed OneTrueMyth's Tool Caddy for my Prusa Mk3S and liked it a lot. Then I glanced over at my trusted Wanhao i3 and thought "mmh, this may actually look pretty good on the i3 too." So an hour later, the tool caddy was outfit…
Simple thumbwheel for Duplicator I3 and Cocooncreate machines. The thumbwheel has an embedded M3 nut dimensions 5.97mm (flat to flat) and 2.50mm high. You will need to set your slicer software to pause at around the 3.5mm - 3.6mm mark…
I have not been using a part cooling fan lately and have not had any issues so i designed a minimal lightweight hot end mount. I may design a compatible part cooling fan part when the need arises. Uses the original m4 hardware to mount to…
The grip on these wraps around the top and bottom and works really well. Also included is a spring spacer to keep the springs from bending side to side. I used a small washer between the thumbscrew and the lower bed to keep it moving…
VERSION 4 now!! - Custom Cooling duct for Wanhao Duplicator D9. Cleaned up the design, lowered the duct holes below nozzle Working perfectly well compared to stock.. Please post the feedback how you liked it or if any improvements. NOTE:…
This is a set of feet for the Wanhao Duplicator i3 Plus printer. These should be printed in TPU to provide stiffness plus vibration absorbing and also to stop any movement or creep during printing. You require x8 in total to provide the…
The ribbon cable and the wires for my Bltouch kept breaking. For that reason I decided to install a cable chain on my 3d printer. This prevents the wires from getting damaged, and also makes the printer look much nicer, at least in my…
I wasn't happy with the existing filament guides available, so I whipped this model up for the Wanhao i3 Duplicator. It is completely rounded in the loop portion and has no opening. It's fairly sturdy and guides the filament well. It…
Updated Design 2022 The X-Axis Gantry on the Maker Select can be a little wobbly, since the span consists of only the 2 x-rods, with their ends only held in by 1 set screw each. This Brace uses a threaded rod to help stiffen things.…
This is my mod for the Rook 2020 to make it use parts from a Wanhao Duplicator I3 Plus Extrusion lengths are: 8x300mm for top and bottom frame 4x350mm for the Z-axis. Printhead in mounting ordbiter v2, trianglelab TCHC TR6, 2x5015, 1x…
Screws needed: 4 M4x10 screws 1 M6x10 bolt A simple contour duplicator using sliders that you can tighten or loosen. There is an option to use 10mm sliders and 1mm sliders. For 1mm you can print them in different colors to indicate each…
It works with both a pencil and a pen. I drilled out the holes to be sure that my pencil or my pen stays in place.
Here's the result of uncountable iterations of trying to improve the part-cooling fan that comes with the Wanhao Duplicator D9 (MKII 400). It's supposed to fit the original 4010 fan without the need of disassembling anything. Just use 2x…
A simple cable guide for the heatbed wires on a Wanhao Duplicator i3. Snaps on to the back of the printer and uses a zip tie to hold the cables down. Easy & fast print. Category: 3D Printer Accessories
These feet eliminate vibrations transferred from your printer to the work bench/table, cutting down on noise without needing to buy a paver and a foam pad. Printed with no supports at 0.2mm layer height in PLA. You will need print 2 as…
I have removed the spools from the back of my printer and mounted them above. What remains are the holes where the reel holders once lived. I don't like open holes to the internals of my printing cavity, so I designed these plugs to seal…
This is a upgrade mod to eliminate the front and back y-frame plates along with the cheap idler bracket and wimpy y-motor bracket. This mod gives you stronger y motor bracket and a better idler tension . Also changes the belt path to be…
If you're tired of super sophisticated fan ducts that work well but obstruct the nozzle from view an hex wrench this might be something for you. And if you're trying to slim your extruder this will be a cut-down of -30g in weight compared…
I just dont like the stock spool holder. even though its metal it is still weak.. i find it sagging as soon as i put on a roll of filament. here is an alternative to the stock holder. (much stiffer) also has a hole for a lockdown screw so…
Mounts to the screws that hold the rods. You do not need longer M3 bolts but wouldn't hurt to replace the M3x6mm bolts with M3x8mm if you have them handy. You will need M2 hardware to attach the camera to the print. Before printing,…
Update:06\02\19 Changed orientation of back plate to print correctly on back rather than side when originally uploaded. SD Card Adapter Housing for Wanhao Duplicator I3 Plus, Balco Touch, Maker Select Recently the SD card Reader on my…
The engineer in me wanted something, well more engineered for a belt tensioner...something that pulled along the belt axis and was in double shear. With that goal I designed both an X and Y tensioner for my Duplicator i3 Plus. Hardware…
Wanhao Duplicator i3 or Cocoon Create Plus Raspberry Pi Camera v2.1 mount (OpenSCAD) Author: Brian Khuu (2019) I use this in conjuction with sticking "Wanhao i3 Clip on Raspberry Pi Octoprint Case" by suzujoji…
Since it's a load-bearing (although minor load) and typically inside enclosure ABS is recommended. I've used 4 perimeters, 4 top/bottom layers and 0.2 layer hight
somebody asked for a fan adapter to use a 30mm fan with one of my 40mm coolers. enjoy.. also added one with a open source hardware badge. Instructions i printed the plain adapter at .2 layer height 10% infill and the osh one at .15 layer…
Bondtech BMG mount for the Wanhao Duplcator 6 / Monoprice Maker Ultimate. This mount improves over the one provided by Bondtech by lifting the extruder and stepper above the enclosure allowing the use of the full build plate. Print…
Required: -2ea x Blowers 5015 (I choose the silent ones, but you should use the regular/fast ones for max cooling) -1ea of each printed part in PETG or material of higher temp tolerance -6ea x Small nylon zip ties ( I used 2mm wide x…
A simple camera mount for a Wanhao Duplicator i3 that has the Z brace mod installed. HillbillyZT's mount wouldn't work with the Z brace mod, so I designed my own. This is compatible with any camera that has a standard 1/4" tripod mount,…
The Monoprice Maker Select V2 is a rebranded Wanhao Duplicator 3 and they are not terrible printers for the price although nowadays there are much better choices. It was the first printer I bought quite a while ago. However, they share a…
I never use my right extruder, so to extend the life of my gantry motors, I removed it (along with the motor) and replaced the whole motor-extruder assembly with these two parts. The fan duct can be installed from the top (recycle the…
Added a funnel guide so that it is easier to load the filament without turning the printer around, a rim so that the halves lock better together and a bypass for flexible filaments. I had to bend the lever as shown and ad a little…
Adapter bracket to install a BigTreeTech SKR v1.4 and optional MOSFET in the Wanhao Duplicator I3 using the welded-in mounting bosses intended for the stock Melzi board. Note that the USB and SD ports do not line up with the original…
I use my old Nexus 5 as an always-on touchscreen monitor for Octoprint. I made this clip to give the phone a home on top of my Monoprice Maker Select. Remixed from Cyul's spool holder clip and Ackeric's Nexus 5 Car Clip Print instructions…
50mm Radial Fan (snail fan) adapter for Monoprice/Wanhao Maker Select Extruder cooling. -the stock 40mm Axial heatsink fan is weak. Inadequate extruder cooling can be a problem, especially if using an upgraded all-metal hotend. Needs more…
This bracket allows mounting the BTT SFS 2.0 on the top support of the Monoprice Maker Select v2
Wanhao I3 Duplicator Filament Sensor I Really liked the TUSH - The Ultimate Spool Holder remix for the Wanhao i3 Duplicator, so I decided to add it to my printer. After this, I decided I needed some form of FIlament Sensor to never come…
This little adapter makes the Zeelo Dual Drive Extruder compatible with a Wanhao Duplicator i3. You'll just need the tensioner arm , the spring , and drive gears . The bowden adapter can be tossed. You'll need to drill a filament sized…
BLTouch mount for the Duplicator 6. For the Duplicator 6+ see the mount by user zauberflo: https://www.thingiverse.com/thing:2894669 I used the holes for the bearing set screw to hold the mount. Use M3x8 or M3x10 screws to mount to print…
https://www.printables.com/model/225717-monoprice-maker-select-v2-wanhao-duplicator-i3-cab includes a handy clip for the cable leading back from the cable chain to keep it out of the way of the bed. It's too short for use with AzzA's…
This is a Dial Indicator mount for a Wanhao Duplicator I3 that attaches to the factory fan location. It is a quick release design for people who run rear mounted coolers or fanless setups. It is designed for DI's with 9.5mm shafts and…
Wanhao Duplicator i3 or Cocoon Create Plus Tool Holder (OpenSCAD) Author: Brian Khuu (2019) You can customise it for other printers with folded metal frames, but this is designed primarily for wanhao printers or aldi cocoon create. The…
This is a bed leveling knob cover that is a simple remix combining 2 different models to work for the Duplicator 9. I created a second version (v2) that is smaller to make sure there is enough clearance around the stabilization bar and…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … For optical reasons I wanted some endpieces for Rossero's…
here are some comparison pictures . first two are from the stock cooler and the next two are from my upgrade cooler. the last two pictures the stock is on the left and the upgrade is on the right. here is a pla alternative to the stock…
This brace I created for the wanhao duplicator 4s will greatly improve your prints by eliminating z-axis swing.. first two pics of other things is showing the weird swirls and rounded waves before I installed the brace. the last pic shows…
Wanhao I3 Duplicator Raspberry Pi 2 Case When adding Octoprint to the Wanhao Duplicator I3, I needed to develop a case for the Raspberry Pi 2 so that it could be mounted to the printer. This case encloses both a Raspberry Pi 2 and two…
Wanhao Duplicator i3 V2.1 Geeetech 3D Touch V3.2 Pro mount https://www.geeetech.com/geeetech-3d-touch-v32-pro-auto-leveling-sensor-p-1222.html Marlin config: define NOZZLE_TO_PROBE_OFFSET { -24.5, -35.7, -2.75 } sensor can be screwed into…
This is a tool caddie for the Wanhao Duplicator i3 Mini. It hangs right on the printer. https://www.tinkercad.com/things/9oBPV6RxyIz Category: 3D Printer Accessories
LATEST version 3 - Uploaded here: https://www.thingiverse.com/thing:4212688 Custom Cooling duct for Wanhao Duplicator D9. Working well compared to stock.. working on next version for blower fan which shall improve this more.. Please post…
Remixed so the power connector switch and wiring loom hole are on opposite sides. Category: 3D Printer Parts
the latest and greatest in my pla cooler collection for the Di3. i have been testing this for weeks before releasing it . takes a 75x75x30mm 12v blower.(i had a few laying around) but can be bought here:…
i just added a foot for an actual o-ring (size =11/16"x 7/16"x 1/8") im using this one now and it works realy nice.the o-ring holds in nice and tight but also gives you plenty meat under the foot for cushion. added v4 as a request . also…
this is remix from Airmaxx23 LED bracket for print area. http://www.thingiverse.com/thing:1498532 If you have an i3 PLUS, you will need to print this bracket because of new components on the PLUS that makes Airmaxx23 bracket not easy to…
By Brian Khuu 2019 This is for a cheap filament sensor, that you can usually find on ebay. This time it will clip right on to the NEMA17 extruder motor of a Cocoon Create Touch and Wanhao i3 duplicator plus. Rev1:…
Couldn't find a proper filament spool holder that would rotate smoothly, so I modeled one myself. Uses the slots reserved for an enclosure on the right side of the housing (distances on the left are different, so not compatible I'm…
Helps keep heat inside by holding the door closed.. Instructions made in pla at 20%.. Category: 3D Printer Accessories
I felt a bit compelled printing tubes and finding M8 bolts. So instead I've designed an insert which has bearing to decrease spool friction using a pair of 625 and one 624 bearings. Insert goes into existing spool holder turned upside…
Wanhao Duplicator 4S Corner protector from TPU
I designed this door lift hinge for my wanhao duplicator 4s because I got tired of having to flip open the door... now the door stays open with no clips or anything else . and even keeps the door closed with no door latch needed. door…
For your consideration is a simple mount for a Logitech C922 webcam for Wanhao Duplicator 6 / Monoprice Maker Ultimate printer (for the printer's left side). The mount fits into the top case slots and allows the camera to hang on the side…
(Updated) i have updated the model with slightly bigger openings for the threaded rod. and also added a sat file for anyone that feels necessary to modify it as long as credit is given.. Here is a Z tower brace mod that I have created to…
Dies ist eine Zugentlastung für den Wanhao Duplicator 9. Diese kann nur montiert werden, wenn der Extruder so angebaut ist, wie man in den Bildern sehen kann! Man braucht zur Montage folgende Sachen: 2x Schraube M3x12 + Unterlegscheibe 2x…
This is a dial indicator mount that I designed to fit onto the front of the Duplicator 9 extruder. It is meant to be used when the extruder is not heated up to probe around the bed to see how level things are compared to the X axis…
EDIT - I've been using these wheels for the past 4 months now and they are a lifesaver. I've releveled the bed a few times during but all of the times it was due to me changing something with the printer or working on it etc. I haven't…
