Original Prusa Enclosure (OPE) - PSU Back Panel Gap Cover
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.70 – €2.08 net (excluding VAT)
For file: psu_back_plate_gap_cover_V3_0.2mm_PETG_MK3S_2h0m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.89 excluding VAT (range midpoint).
- Weight reported by the author
- 23 g
- Print time reported by the author
- 2 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The enclosure has a gap between the back panel and the PSU mount. With this cover, it can be closed easily.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
Probably from some imperfection or heat coming from the PSU, my back panel is a bit bent at the corner where the PSU is mounted on the enclosure. This leads to a gap over the PSU mount and the back panel (see photo).
I tried a existing model to close the gap between the PSU mount and the back panel (PSU Cable Pass-thru Cover [BLANK]- Original Prusa Enclosure (OPE)). But it did not work for me because on my enclosure I installed the Prusa PSU quick-release Add on and a larger cover over the quick-release socket below the PSU. So there is no space to install the Pass-thru cover mentioned.
This model is simply inserted between the PSU and the back panel and then pushed down. That's it!
The model is crated with FreeCAD 0.21.2