Original Prusa Enclosure (OPE) - PSU Back Panel Gap Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The enclosure has a gap between the back panel and the PSU mount. With this cover, it can be closed easily.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Probably from some imperfection or heat coming from the PSU, my back panel is a bit bent at the corner where the PSU is mounted on the enclosure. This leads to a gap over the PSU mount and the back panel (see photo).
I tried a existing model to close the gap between the PSU mount and the back panel (PSU Cable Pass-thru Cover [BLANK]- Original Prusa Enclosure (OPE)). But it did not work for me because on my enclosure I installed the Prusa PSU quick-release Add on and a larger cover over the quick-release socket below the PSU. So there is no space to install the Pass-thru cover mentioned.
This model is simply inserted between the PSU and the back panel and then pushed down. That's it!
The model is crated with FreeCAD 0.21.2