Parametric Hex Bit Storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fully parametric bit storage system for Fusion 360.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 138
- Makes
- 1
- Views
- 487
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This parametric Fusion 360 model allows you to tailor bit storage to your specific requirements.
The main parameters are as follows:
- qty_x - number of bits in the x axis
- qty_y - number of bits in the y axis
- bit_width - the size of the hex bit with some tolerance added in (default 6.65)
- margin_x, margin_y - defines the border size (default 3mm)
- separation_x, separation_y - defines how far apart the holes are placed (default 2mm)
To access parameters, choose Modify>Change Parameters from any modelling tab.
The parameter bit_width governs how loose or tight the fit is for the bits; the default value works for me with my setup.
Note - Fusion is a bit funny about some parameter changes and fails to redraw the model correctly. In this case use CTRL-B or ⌘-B to recalculate.
Also be careful not to overtax Fusion's calculation engine - 20x20 is more than enough to bog it down, although it will still work.