1 / 3
Telescope Tube rings 240mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tube rings to hold a Telescope with the Tubesize of 240mm
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 80
- Makes
- 0
- Views
- 720
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Those tube rings are specifically made for my Hand made Telescope which was missing Tube rings. As a way to mount hings to it, I decided to use countersank M6 bolts.
Those are slightly to small for the bolts themselves which is intentional so you can use a soldering iron to push them in all the way.
The Screw holes are strengthened in the slicer with two additional walls.
I made M6 screw heads which work perfectly with this model.
Make sure it holds your Telescope with small tests! I'm not taking responsibility if it falls.