Timberland Hound II for 6 mm Scale Wargames - FDM Printable Without Supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mech miniature (4 cm in height) fully printable in FDM without supports.
- Rating
- 5 / 5
- Likes
- 64
- Downloads
- 429
- Makes
- 2
- Views
- 1,660
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A proxy model for the most iconic clan mech with an unmistakable shape. Model on the photo was printed using Prusa MK4 with 0.25 nozzle, PrintWithSmile Rec-PLA (Just Grey) and with 0.07 mm layer height.
Painted in Draconis Combine (Sword of Light, 8th Regiment, 1st Batallion, 7th Heavy Reconnaissance Lance) colors using Vallejo Game Colors.
The model is positionable and various stances can be created during the assembly.
Printing Guide
I have created the model with FDM printing in mind (as I do not have adequate safe space for a resin printer), thus the model is composed of several parts that are printed separately and then assembled and glued together. As the model is in 6 mm scale, parts are tiny and precise nozzle (~0.2 mm) is required.
General Settings
- Material: Any quality grey PLA tested and recomended
- Nozzle: 0.2/0.25 tested and required
- Layer Height: 0.07 or smaller tested and required
- Supports: not required
- Brim: selected bunny ears or overall brim recommended (see attached projects for PrusaSlicer)
- Infill: 10 % honeycomb tested and recommended
- Speed: As with any other minis, slower is better even with modern IS capable printer
Required Parts
- Main body
- Print COCKPIT, ENGINE and HIPS.
- Amaments
- Print LRM10-R and LRM10-L.
- Print ARM-R and ARM-L.
- Print 2x GAUSS.
- Locomotion
- Print UPPER-LEG-R and UPPER-LEG-L.
- Print LOWER-LEG-R and LOWER-LEG-L.
- Print 2x FEET.
Optional Parts
- Base
- Print BASE.
- You can print SURFACE if you want to add a road fragment to the base.
- Markings
- Print DC-BACKPATCH.stl with Sword.
- Print DC-LEGPATCH-L.stl with lance number.
- Print DC-LRMPATCH-L.stl with Dragon.
Assembly Guide
| (1) Glue together COCKPIT and ENGINE. Be aware to position the cockpit correctly and to align it with engine well. Small pieces of cut filament can help you. | ![]() |
| (2) Glue HIPS to ENGINE and finish the main body. HIPS can be rotated as you wish. | ![]() |
| (3) Add LRM10-R and LRM10-L. | ![]() |
| (4) Glue GAUSS to ARM-R and ARM-L | ![]() |
| (5) Glue ARM-R a ARM-L to prepared body. | ![]() |
| (6) Glue UPPER-LEG-R and UPPER-LEG-L. This is the time to consider the overall position of the model on the BASE and rotate/position the legs accordingly. | ![]() |
| (7) Glue LOWER-LEG-R and LOWER-LEG-L. This is the time to consider the overall position of the model on the BASE and rotate/position the legs accordingly. | ![]() |
| (8) Glue 2x FEET. This is the time to consider the overall position of the model on the BASE and rotate/position the legs accordingly. | ![]() |
| (9) (OPTINAL) Glue SURFACE to BASE. | ![]() |
| (10) (OPTIONAL) Attach the model to the BASE. | |
| (11) (OPTIONAL) Attach Dragon to LRM10-L. | ![]() |
| (12) (OPTIONAL) Attach Sword to the back. | ![]() |
| (13) (OPTIONAL) Attach lance number to the left leg. | ![]() |
Painting Guide
- Start with a primer (airbrush or spray). Typically with white, grey or black color. The presented model was primed with white spray.
- Cover the whole model with a base coat of primary color. Be cautious to properlly thin the color. Several layers may be required. The presented model was coated with Scarlet Red.
- Add primary accents in several layers of thinned colors. The presented model is using Bloody Red and Wolf Grey asi primary accents.
- Add depth using darker wash, like Sepia Wash in the presented model.
- Add depth with edge highlights with lighter colors. The presented model was highlighted by mixing Bloody Red with Golden Yellow.
- Tight the colors together with a color ink. Red Ink was used with the presented model.
Enjoy and post your Mechs!











