Low Cost Extrudr Spool Tower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low Cost Extrudr Spool Tower
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 29
- Makes
- 1
- Views
- 223
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of Oachkatzl's spool tower for Extrudr filament spools (see https://www.printables.com/model/762969-extrudr-spool-storage-tower)
I've redesigned it to minimize material usage and for a easier print. Also I've made a base so the center rod can be attached to a flat surface with Ø4 mm countersunk screws if required.
Currently I've created the models for a Ø 25 mm rod; if other diameters are required, please let me know.
Also I've designed the outer bearing diameter a little too small on purpose in order to have some flexibility for tolerances of slightly different spool inner diameters. Just place some duct tape onto the bearing outer surface.