Raspberry Pi Camera Module 2 Mount - Voron 2.4 R1 optional Neopixel cutout
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry Pi Camera Module 2 Mount - Voron 2.4 R1 optional Neopixel cutout
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 81
- Makes
- 0
- Views
- 897
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Added notches to the existing models for camera pass through and added blank covers for the other corners.
To mount the camera, you will need parts from the original model. (case_back_left/case_back_right, case_front, and hinge). Use the recommended hardware from the original model.
Update: original model came from below link. Thanks edmogeor@edmogeor_424930
https://mods.vorondesign.com/details/LzEFU0RDHXUarF7y69x2Q
Update #2: Added models for 3 x 24 AWG wires (servo wires) I used these for Neopixel lights.
z_belt_cover_left_2.4R1_blank_CableCutOut.stl
z_belt_cover_right_2.4R1_blank_CableCutOut.stl