1 / 4
V0.2 Toolhead PCB Mount for Galileo 2 (G2SA)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Umbilical Toolhead mount for V0.2 and Galileo 2 standalone extruder
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 58
- Makes
- 0
- Views
- 425
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
I added the mounting holes for the G2SA so the Toolhead PCB mount can be secured to the extruder as well as the X carriage. I had been previously using an Orbiter 2 toolhead mount and the holes do not line up correctly on the X carriage.
You will need 18mm standoff, I purchased these…
https://www.amazon.com/dp/B09X9B86V7
They will screw into the leftover threads on the back of the G2SA. The 5mm spacer is for the screws between the toolhead PCB mount and the x carriage.