1 / 4
End Cap for EX-1010 Aluminum Extrusion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Another iteration of my TPU trim pieces for aluminum extrusion.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 206
- Makes
- 1
- Views
- 617
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
V1 is very tight fitting, which is good or bad depending on your materials and goals.
V2 is too loose, V3 was perfect for my materials.
Play with scaling by a few percent may also help depending on calibration, etc.
All of these pieces were printed with TPU 95A, 0.28 layers, 25% grid infill, 2.5 mm3 flow, 240C nozzle, and 140F dryer.
TPU can stand the torque of firm twisting into place, but the flimsier pieces (eg, slotted guides), need more work and maybe needlenose pliers.