USB TF micro SDcard Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
USB, TF, micro SD, SDcard Holder using Vase mode (Spiralized outer contour in Cura). Holes for mounting are 3mm.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 36
- Makes
- 0
- Views
- 189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
USB, TF, micro SD, SDcard Holder using Vase mode (Spiralized outer contour in Cura).
Holes for mounting are 3mm.
it also holds USB C if inserted diagonal in the square holes.
I have added V2 with tighter fit for SDcards I reduced width to 26mm and increased height to 13mm.
This is a remix of
https://www.thingiverse.com/thing:4499792
which is a remix of
https://www.thingiverse.com/thing:2835728
Notes:
You may need to increase line width from standard 0.4 to 0.5 +5% to 10% flow or 0.6 +10% to 20% flow to get a tighter fit depending on your printer tolerances. you can test using test piece.
Base plate is 1.4mm thick and needs initial layer and bottom thickness to be this size.
check you bottom layer count to make sure it is 1 less then the start of vase or spiral contour layer (if vase starts at layer 6 you want 5 bottom layers)
I used 0.28mm for my initial layer and layer height. 5 bottom layers
Category: Computer